(English) Non-return valves

(English)

Non-return valves or check valves

Simple non-return valve

Check valves have the task to shut off the flow in one direction and allow free flow in the opposite direction within a hydraulic circuit. They are also referred to as non-return valves:

The functioning is quite simple:

Hydraulic non-return valve

Hydraulic non-return valve

The sectional view shows a check valve with a cone as a closing element which is pressed by the spring onto the seat of the housing. The pressure required to move the closure member against the spring can be referred to as the opening pressure. This depends on the chosen spring and the area of conical surface and is usually between 0.5 and 3 bar.

Application hydraulic non-return valve

Hydraulic non return valve application 1

Hydraulic non return valve application 1

Mounting within the pump line, to protect the pump from pressure surges or to avoid oil drain due to external load on the pump.

Hydraulic non return valve application 2

Hydraulic non return valve application 2

Install parallel to a filter. Upon reaching a certain pressure (e.g. 3 bar), the oil is diverted to the filter. So the system can still work despite of a clogged filter.

Hydraulic non return valve application 3

Hydraulic non return valve application 3

Mounted parallel to the throttle point: only in the direction A to B you have a throttling. In the reverse direction the check valve opens.