(English)

AC Inductive Circuits

AC Applied to an ideal Inductor

Ideal Inductor to AC voltage - phase shift between current and voltage

As you can see, the current through the coil is 90° out of phase - and delayed. Why?

The periodically alternating current flow creates a magnetic field in the coil that also alternates periodically. This alternating magnetic field in turn results in an induction voltage, which (according to Lenz's rule) is opposite to its cause - namely the applied supply voltage.

With sinusoidal current, the slope or rate of change is maximum at the zero crossing. The self-induction voltage of the coil therefore also must have its maximum at these points.

Conversely, at maximum or minimum of the current curve, the rate of change of the current has the value 0. The value of the self-induction voltage is therefore also 0.

(English)

Real World Inductor

Experiment: Here you can see how at AC voltage the maximum current of 1 A can only be reached with a higher voltage. So an additional resistance has to appear at AC voltage.

You can also see that the current decreases significantly at AC voltage supply as soon as you insert an iron core. At DC voltage supply this has no influence.

Every real world inductor has some unwanted wire-resistance. So the total resistance, called Impedance is a combination of the wire-resistance and the reactance:

Real world Inductor and its Impedance

In the equivalent circuit diagram of a real coil ohmic resistance and reactance are in series. Nevertheless, the total resistance or impedance is determined by means of Pythagoras. The Pythagoras can be applied to right-angled triangles. This resistance triangle, like the power triangle, can be derived from the voltage triangle:

Real coil - Voltage triangle

If the current I is the common value of a series connection, each side of the voltage triangle can be multiplied or divided by the current I. This results in 2 equiangular triangles:

Real coil amd its Resistance and Power triangle

... soon coming more